|
RV shades (1" pleat) are custom ordered (allow approximately 3 weeks for delivery) in 3 styles:
1. Day Shade (semi transparent) AND Night Shade (privacy) COMBINATION (stacks on top of each other in one unit) 2. Night Shade (privacy) ONLY or 3. Day Shade (semi transparent) ONLY RV pleated shades, above, can be ordered with either A or B: A. EZ Lift constant tension (NO pull up-down chords) - are the primary style used by manufacturers of most RVs and boats. EZ Lift pleated shades have side vertical cords with bottom eyelets that are screwed in at each lower corner area of you window opening, creating constant tension on the RV shade. You lift with your hands and let go - leaving the shade with no rattle or lowering until you pull it into a different position. B. Pull Chord - have a bottom rail that can be ordered with a hold down at each bottom corner. The hold down bracket (plastic) must be pulled out of the end of the shade to pull a chord to fully open this style of RV window shade. RV pleated shades can also have a block out liner added as an option. The liner material is UV resistant and does not allow light to go thru the privacy night shade section. PRICE QUOTES - Please measure your window shade areas BEFORE contacting us! Every size increment and quantity of RV shades will be a different price - quoted with shipping MEASURING: EZ Lift Constant Tension and pull cord RV shades are ordered in exact finished sizes. Therefore, RV shades need to be larger than the interior clamp frame for each window (making the shade cover properly). If room allows, we typically add 1 inch to each side, 1 inch past the bottom and add about 3+ inches (depending on the type of shade) to the top of the interior window clamp frame for full coverage. If your windows have valance boxes above, go to the inside - top of the upper valance box and measure down at least 1 inch past the bottom of the interior window hole - this is the FINISHED HEIGHT. On most installations, measure the inside of a top valance box - side to side and deduct a minimum of 1/4" - that is the FINISHED WIDTH. However, a narrower shade could actually work as long as the finished shade covers about 1" past the interior window hole on each side.
If your windows also have side valance boxes, the shades need to be at least 1/4" narrower on each side of the side valances, to allow the shade room to travel up and down without hitting any obstruction - this is the FINISHED WIDTH. Your finished height is measured as the instructions above.
SCROLL DOWN FOR RV SHADE COLORS & RAIL COLORS (returnable samples available after quotation) |
||||
|
RAIL COLORS: PRICE QUOTES - Please measure ALL window shade areas BEFORE you Contact Us
|
||||
|
|
|
|
|
|
|
ALABASTER |
BLACK |
TAUPE |
WHITE |
DRIFTWOOD |
|
|
|
 |
 |
|
GREY BLUE |
GREY |
HUNTER |
SEA OYSTER |
DUSTY GRAY |
|
|
|
|
|
|
