|
Please take the time to accurately measure the area where you plan to place Flexsteel RV / Marine Furniture before you contact us. We must have this information to be in a position to assist you in your search for quality RV and Marine / Boat furniture. Measuring the area for RV and Marine seating is one of the most important factors in being able to assist you. To determine what styles and sizes of Flexsteel Marine / RV furniture will fit your individual requirements we MUST know the size of the area it is to occupy. Obviously, a dealer can't quote you a price on an RV or a Yacht without knowing the details of what you want --- size, options, etc. Different Marine and RV Sofas have different sets of required measurements. Various styles of RV Chairs also have their own measurements. To assist with those styles and models that will satisfy your particular needs --- including Flexsteel Sofas and Sofa Beds --- we need to know the following: the overall height, width and depth of the area in which you plan to place the furniture. Raised floor slides create MAJOR concerns!! |
|
|
MARINE AND RV SOFAS AND SOFA-BEDS All measurements are made while FACING the area the sofa is to occupy. |
|
|
1. Height: Measure from the floor, up to any obstruction on the wall or ceiling. 2. Width: Measure from left to right, the full width of the area the furniture is to occupy. 3. Depth: Measure from the wall, out to the edge of the area the furniture is to occupy. 4. Height of Slide Floor, Closed: Measure from the main floor, up to the top of the slide floor. 5. Height of Slide Floor, Open: After the slide has been opened, does it lie flat, or is it raised above the main floor? If it is raised, measure from the main floor, up to the top of the slide floor. 6. Depth of Slide Floor: Measure from the wall, out to the edge of the slide floor. 7. Bed Depth: Measure from the wall, out into the room for the maximum distance for the bed to open. 8. Obstructions: Measure the height, width, depth and location of any water tanks, pumps, wheel wells, electrical boxes, etc. that are in the area the furniture is to occupy. These obstructions will occupy space under the new furniture and affect drawer space, etc. --- see photo below --- |
|
|
|
|
|
MARINE AND RV CHAIRS All measurements are made while FACING the area the seat is to occupy. |
|
|
1. Height: Measure from the floor, up to the highest point of the chair. 2. Height of Pedestal: Measure from the floor, up to the top of the plate the chair mounts on. 3. Width: Measure the distance across, from the outside of the left arm to the outside of the right arm. 4. Depth for stationary Chairs: Measure from the front of the seat cushion to the farthest point on the back of the chair. 5. Depth for Recliners: With the chair in the regular sitting position, measure from the front of the seat cushion to the farthest point on the back of the chair. --- see photos below --- |
|
|
|
|
